acwlitebanner


Analog-CAN-Conversion

The ACW-Lite Box is more compact than the standard ACW-System, but has almost the same possibilities in terms of sensor installation.
The Lite Box's setup of for example filter, amplification, offset etc. are done manually or via PC software.

The ACW-Lite Box is equipped with different piggy-back plugin-boards. Basically there are 5 plugin-cards to be installed, and because the TSV4P4 is always in place our customers can choose between 4 plugin cards to combine the other 4 slots as needed in their projects.

  ACW_LITE4_Front_SPg3
Plugin-boards:  
   


  • differential Inputs (+IN und -IN) for passive pressure-sensors, like DMS-sensors from e.g. Kulite or IST


  • single ended Input with unipolar sensor supply (+5V) for active pressure-sensors, like e.g. DS2-sensors
  • usable for single ended inputs or differential Inputs with unipolar sensor supply (+5V /+12V) for special sensors, like e.g. accelaration-, wheel-angle-, yaw-rate-sensors or poti

 

  • single ended input with bipolar sensor supply (± voltage) für special-sensors, like e.g. acceleration- oder wheel-angle-sensors
  • for temperature measurement up to +960°C (higher temperatures on inquiry)
   
Features:  
   
  • DCW-function:
  • 24 digital-signal-inputs over optocoupler
    3 digital-signal-outputs over optocoupler
  • programming:
  • manually via display and button input
  • via PC-coniguration-software
  • Interface-functions:
  • CAN-Ports for the MBOX system
    1 CAN-Port for CAN
    (1 USB-Port integrated, USB-communication-software
    optional)
    1 RS232-Port
   
Specifications:  
   
  • power supply:
  • current consumption:
  • ambient temperature:
  • air humidity:
  • dimensions:
  • +9...+15VDC
  • depending on installed boards max. 25W with sensor supply
  • -20°C to +75°C
  • 40% to 90% relative humidity
  • w: 295 mm, l: 205 mm, h: 58 mm
   
Info:  
   

For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change.
 

 

 

 

ACW-System

mboxbanner

The MBoxes are expansion devices and can be used as stand-alone or in addition with an ACW-Lite Box or any ACW-System

 
DS2M8small1DS2-M8

UMP4smallUMP-M4
MBOX's  
   

Temperatur IN:

DS2-M7/M8:

UMP-M4:

MBOX with 8 Temp-Ins

MBOX with 8 analogue input channels (4/5x red / 4/3x yellow)

MBOX with 4 UMP-channels

   
Features  
   

Interface:

Power IN:

2 CAN-Ports for the ACW-Lite Box system
1 USB-Port
UIN: 8 .... 50V DC

lieferumfang
Info  
   

For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change.


 

(5x rot / 3x gelb)

measurementbanner


MBox / Set-Top   DS2M8small1
     
ACW-Lite   ACW_LITE4_Front_SPg3
     
TSV5 Piggy   TSV5P8small

 

l1bipbanner


L1-BIP
Piggy for universal-sensors

   

The L1-BIP-Piggy utilizes 4 input-channels for single ended input with bipolar sensor supply (± voltage) for special-sensors, like e.g. acceleration- or wheel-angle-sensors.

This Piggy-Back is an option for the ACW-Lite Box.

For identification, the ports are marked with a gray colored ring.

l1pb_bip_grau_sp3
Einsteckkarten  

  • Bridge voltage:
  • Input voltage:
  • Sensorport:
  • Port ring color:
  • Amplification:
  • Filter:
  • Compensation:


  • 5V / 12V (depending on the base system)
  • -10V...+10V at amplification 1
  • 4 LEMOSA Ports 4plug, EPG.0B.304.HLNS
  • Grey
  • Factor: x1 / x2 / x4 / x8
  • 18Hz / 20Hz / 200Hz / unfiltered
  • Offset

Optionen  


For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change. 

 

 

 

tsv5p4banner


TSV5P4
Temperature sensor amplifier plugin-board

   

The TSV plugin-board has four temperature output channels for NiCrNi sensors.

This piggy-back unit is built in as standard in any ACW-Lite box and is always included.

tsv5neu3
Einsteckkarten  

  • Temperature input:
  • Sensor connector:
  • Temperatue measure area:
  • Resolution:
  • Measure rate:


  • 4 channels, galvanic seperated
  • NiCrNi-Sensor
  • -100 .... +960°C
  • 0,1°C at -100 .... +960°C
  • 1/sec

Optionen  


For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change.

 

 

Main Page Contacts Contacts
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
Ok Decline